Unboxing WM Doll WM-161 with no. 55 and no. 108 heads

4 posts / 0 new
Last post
#1 14. April 2019 - 1:17
Dollstudio
Dollstudio's picture
Offline
Last seen: 2 years 8 months ago
Joined: 11.01.2015 - 00:21

Unboxing WM Doll WM-161 with no. 55 and no. 108 heads

Hi,

it has been a while since I made an Unboxing review for a Jinsan doll, so it's time for some updates. I will not duplicate everything which has remained the same; for the basics, please take a look at the older unboxing posts. Instead I will concentrate on things which have changed.

So here it is, the Unboxing quicky for the WM Doll WM-161 body style with Jinsan no. 55 and no. 108 heads.

Packaging.

A couple of things have changed in packaging. On the outside, it's still the same cardboard box. But now the inner walls are padded with some plush material. It's not the blanket, that one still comes extra.

On the left side is room for two heads:

On the right side of the box, the upper body shows up:

The doll itself comes in a huge plastic bag - that's unchanged.

But this is new: There is a plywood protection against neck pokes:

IIf I remember correctly, that's the first time that I have seen a doll packaging from China using a more rigid material than cardboard and foam layers (except the rare & expensive flight cases). That's interesting. The interesting question is, how the gooseneck holds up if it bangs against the plywood… however, at least in this case, the neck wasn't damaged.

That's the padded box with the doll removed:

Looks cozy.

Hands - still wrapped in some padding:

Feet - still wrapped in some padding:

Also, the big toe is now movable as it has a wire embedded.

Accessories.

Factory 'gifts' are still the same as they were in the past years - comb, gloves, USB heating rod and a plastic enema:

Random factory outfit, also pretty much the same as Jinsan shipps for years - a simple negligee:

But that's new: A printed manual, mostly in Chinese, and a sticker with some kind of serial number:

Though, it would be nice to know what we can do with this serial number. The last time I got serial numbers together with a Jinsan doll was about two years ago through George from X/S. Back then, the Chinese WM Doll website had a defunct feature which was supposed to validate the serial number. Temporarily, Junying/Aiersha tried something similar, but it was taken down as well. Another question would be what value an serial number on a separate sticker really has as it's not permanently tied to the doll's body. I think Doll Sweet's approach with engraved serial numbers in the doll's neck makes much more sense. But maybe it's a start to finally do something against product counterfeiting.

(continued in next post)

Metadata

Classification
Category: 
Gender: 
Material: 
Manufacturer: 
Attached pictures
14. April 2019 - 1:23
Dollstudio
Dollstudio's picture
Offline
Last seen: 2 years 8 months ago
Joined: 11.01.2015 - 00:21

Re: Unboxing WM Doll WM-161 with no. 55 and no. 108 heads

Next, let's take a look at the body.

The WM-161 body style is well-propotioned and has nice curves with big, but not huge breasts.

The specified weight is 36. The WM-161 keeps this weight; without head, she is 34 kg. The heads weight between 1,6 and 2,0 kg, so the total weight with head is 35,6-36,0 kg. That's quite OK for a life-sized TPE doll.

She has yummy breasts:

These breasts are soft!

When moving the body, the breasts jiggle nicely.

A full body shot - inviting!

Some details of the lady parts:

(continued in next post)

Attached pictures
14. April 2019 - 1:26
Dollstudio
Dollstudio's picture
Offline
Last seen: 2 years 8 months ago
Joined: 11.01.2015 - 00:21

Re: Unboxing WM Doll WM-161 with no. 55 and no. 108 heads

Jinsan head no. 55 aka OR Doll Linda (OR-015):

This head weights ~2,0 kg.

Jinsan head no. 108 (WM Doll no. 108 head):

This head weights ~1,6 kg.

Some details:

Eyes:

The blue eyes are piercing…

The mouth has the usual TPE design:

There is an oral cavity, and the teeth are poured in same TPE like the body, thusly they do not appear clean white.

The neck connector is still the same as half a decade ago - a standard M16 thread:

Though, there are changes in details of the neck connector, but compatibility with older dolls is kept.

Verdict.

Overall, Jinsan is still Jinsan. But a couple of details have changed to the better.

Some thought went into inproved packaging and padding. The results are good; in this case, the doll had no scratches, dents or tears.

Manufacturing quality of this doll is quite good. Body makeup was applied cleanly and the heads are pretty flawless.

This doll is a decent sex toy for sure. She is quite soft, actually too soft for my (personal) taste. But that comes with basically all current TPE dolls: same softness everywhere, very nice breast jiggle, but other body parts feel equally soft. For a companion in bed that is probably nice, but for posing the softness is not beneficial. You should lift such a soft doll very carefully if you do not want to risk skeleton parts to poke through just from rough handling.

As always, it really depends on what you are looking for if this is the right doll for you. For sex she is a winner, for other purposes like everyday companionship, the alternatives might be worth to take a closer look.

Sandro

Attached pictures
5. May 2019 - 2:27
Dollstudio
Dollstudio's picture
Offline
Last seen: 2 years 8 months ago
Joined: 11.01.2015 - 00:21

Re: Unboxing WM Doll WM-161 with no. 55 and no. 108 heads

Hi,

this doll is available for sale from stock; please see here for details.

Sandro

Log in or register to post comments

Related content

Similar content as discovered by similarity of classification:

WM Dolls WM-163/C body style (2014) (Body)
(Body)
Material: TPE
83% similarity
WM Doll WM-165 body style (2015) (Body)
(Body)
Material: TPE
83% similarity
WM Doll WM-161 body style (2016) (Body)
(Body)
Material: TPE
83% similarity
OR Doll OR-166 body style (2016) (Body)
(Body)
Material: TPE
83% similarity
WM Doll WM-168/E body style (2017) (Body)
(Body)
Material: TPE
83% similarity
OR Doll OR-162/N body style (Body)
(Body)
Material: TPE
83% similarity
WM Doll WM-167 body style (2017) (Body)
(Body)
Material: TPE
83% similarity
OR Doll OR-160/H body style (Body)
(Body)
Material: TPE
83% similarity
WM Doll WM-162/A body style (2018) (Body)
(Body)
Material: TPE
83% similarity
OR Doll OR-167/G body style (2018) (Body)
(Body)
Material: TPE
83% similarity
OR Doll OR-167/D body style (Body)
(Body)
Material: TPE
83% similarity
Dolls Lounge T161 body style (2018) (Body)
(Body)
Material: TPE
83% similarity
Dolls Lounge Mermaid body style (2019) (Body)
(Body)
Material: TPE
83% similarity
WM Doll WM-165/K body style (2015) (Body)
(Body)
Material: TPE
83% similarity
(Brand)
Material: TPE
83% similarity
SSD
(Brand)
Material: TPE
83% similarity
(Brand)
Material: TPE
83% similarity
WM Doll No. 31 head (Head)
(Head)
Material: TPE
83% similarity

Related forum topics

Similar forum topics as discovered by similarity of classification:

Forum topic In forum… Last updated… Similarity Ops
Weekly summary 16/2019 Dollstudio 4 years 11 months ago 83% similarity
Weekly summary 18/2019 Dollstudio 4 years 10 months ago 83% similarity
Weekly summary 20/2019 Dollstudio 4 years 10 months ago 83% similarity
Weekly summary 21/2019 Dollstudio 4 years 10 months ago 83% similarity
Weekly summary 22/2019 Dollstudio 4 years 10 months ago 83% similarity
Weekly summary 23/2019 Dollstudio 4 years 9 months ago 83% similarity
Weekly summary 24/2019 Dollstudio 4 years 9 months ago 83% similarity
New photos with OR Doll OR-162/N body style and ›Miriam‹ head (OR-040) OR Doll 5 years 2 months ago 67% similarity
Weekly summary 04/2019 Dollstudio 5 years 1 month ago 67% similarity
New photos with OR Doll OR-167/G body style and ›Kaya‹ head (OR-031 / Jinsan no. 249) OR Doll 5 years 2 months ago 67% similarity